Hi all!
I just finished all my job with h5450.
Here is the foto. You need 4 wires: D+, D-, Gnd, and +5V
D+ and D- goes to corresponding USB connector pins, Gnd You can find everywhere on board and as for +5V i recomend to use some external power source (i personaly managed to connect to charger pin inside of ipaq, it is quite powerfull).
For testing i use 256Mb flashdrive by LEXAR. After installing 3 modulse:
kernel-module-scsi-mod
kernel-module-usb-storage
kernel-module-sd-mod
all goes fine.
Thanx, Joshoa
This archive was generated by hypermail 2.2.0 : Wed Apr 05 2006 - 09:31:47 EDT
