v0.7 pre5 3900 jffs2 image boot problems

Greetings,

I've been unsuccessful in getting the familiar v0.7 pre5 jffs2 to initialize
and startup. I've tried the bootstrap, bootopie and the bootgpe2 images
from http://familiar.handhelds.org/familiar/releases/v0.7/install/ location,
but get the same results from each. In all case the touchscreen goes dark.

A number of problems are shown below in the console initialization messages
I get when using the bootstrap image. The first sign of problems is when
the /linuxrc init script is unable to open the /proc/hal file to identify
the model. This then causes a number of subsequent failures.

Another unique problem identified by the following console message:

        error while loading shared libraries: libgcc_s.so.1: cannot open
shared object file: Error 9

Sure enough, libgcc_s.so.1 is not found when I display the contents of the
/lib directory from the console.

As a sanity check, I've installed the bootgpe2 pre4 image and it initializes
and starts up fine.

Help please,

*E

boot> boot
booting jffs2...
booting boot/zImage from partition >root<
Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds!
build_list: max = 01F7FFBC
.
dir entries = 000002CE
frag entries = 00000A85
+4 increments = 00000000
+file_offset increments = 00000D59
loaded file of size = 0x000A2764 at location 0xA0008000
kernel partition base A0008000
kernel_magic=E1A00000
kernel_region_words[9]=016F2818
Linux ELF flash_imgstart=50040000 size=01F80000 dest=A0000000
offset=00008000
MMU Control=00000079
MMU PIDVAM=00000000
Skipping kernel copy by request.
A0008000: E1A00000
A0008004: E1A00000
A0008008: E1A00000
A000800C: E1A00000
A0008010: E1A00000
A0008014: E1A00000
A0008018: E1A00000
A000801C: E1A00000
A0008020: EA000002
A0008024: 016F2818
root_filesystem_name=ramdisk
Grabbed linuxargs, argc = 00000001
Using mach_type 000000CB
setting boot parameters to
noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttyS0
Making core tag at A0000100
Making cmdline tag at A0000114
Making mem32 tag at A00001D0
command line is:
mtdparts=ipaq:0x00040000_at_0x00000000(bootldr)ro,0x01F80000_at_0x00040
000(root),0x00040000_at_0x01FC0000(asset) noinitrd root=/dev/mtdblock1
init=/linuxrc
console=ttyS0 rootfstype=jffs2
Disabling LCD controller
linuxEntryPoint=A0008000
Booting Linux image
CP15 r0=69052904
CP15 r1=00000079
CP15 r2=A39F4000
CP15 r3=FFFFFFFF
CP15 r5=0000000F
CP15 r6=40014000
CP15 r7=FFFFFFFF
CP15 r8=FFFFFFFF
CP15 r9=FFFFFFFF
CP15 r10=FFFFFFFF
CP15 r13=00000000
CP15 r14=AD147FD7
CP15 r15=FFFFFFFF
Uncompressing Linux.......................................... done, booting
the ke
rnel.
Linux version 2.4.19-rmk6-pxa1-hh6 (jamey_at_vimes.crl.hpl.hp.com) (gcc version
3.2.1
 20021002 (prerelease)) #8 Thu Mar 13 12:10:22 EST 2003
CPU: XScale-PXA250 revision 4
Machine: HP iPAQ H3900
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
Reserved 4096 bytes at a3fff000 for RTC hack
Restoring saved RCNR value to 1047885466 (from c3fff000)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
mtdparts=ipaq:0x00040000_at_0x00000000(bootldr)ro,0x01F80000_at_0x0
0040000(root),0x00040000_at_0x01FC0000(asset) noinitrd root=/dev/mtdblock1
init=/linu
xrc console=ttyS0 rootfstype=jffs2
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 63352KB available (1061K code, 305K data, 64K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Using PXA250 frequency points.
Registering CPU frequency change support.
CPU clock: 398.131 MHz (99.000-400.000 MHz)
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch_at_atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis
Communications A
B.
Console: switching to colour frame buffer device 40x30
iPAQ H3600 keyboard driver v1.0.1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 14) is a PXA UART
ttyS01 at 0x0000 (irq = 13) is a PXA UART
ttyS02 at 0x0000 (irq = 12) is a PXA UART
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
IPAQ flash: probing 32-bit flash bus, window=c48a6000
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Using cmdline partition definition
Creating 3 MTD partitions on "IPAQ flash":
0x00000000-0x00040000 : "bootldr"
mtd: Giving out device 0 to bootldr
0x00040000-0x01fc0000 : "root"
mtd: Giving out device 1 to root
0x01fc0000-0x02000000 : "asset"
mtd: Giving out device 2 to asset
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
enable_irq(9) unbalanced from c00af374
mtdblock_open
ok
JFFS2 mount took 17 jiffies
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 64K
Setting up RAMFS, please wait...
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h3600_hal.o
cat: /proc/hal/model: No such file or directory
[: 3900: unknown operand
Setting up some devices
Executing /sbin/init...
INIT: version 2.78 booting
Not recalculating module dependencies
Loading modules: apm Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-
pxa/h3600_hal.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/apm.o
h3600_ts Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h3600_ha
l.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/char/h3600_ts.o
sa1100-rtc Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/char/sa1100-rtc.
o
SA1100 Real Time Clock driver v1.03
h3600-sleeve Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h360
0_hal.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h3600-sleeve.o
h3600_generic_sleeve Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-
pxa/h3600_hal.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h3600-sleeve.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/pcmcia/pcmcia_core.o
Linux Kernel Card Services 3.1.22
  options: [pm]
Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/pcmcia/pxa/sa1100_h3600.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/pcmcia/h3600_generic_sleeve
.o
h3600-uda1341 sa1100_cs h3900-uda1380 Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kern
el/drivers/sound/pxa-audio.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/i2c/i2c-core.o
<7>i2c-core.o: i2c core module
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h3600_hal.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/sound/soundcore.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/sound/h3900-uda1380.o

Mounting local filesystems...
mtdblock_open
mtdblock_release
ok
Setting the System Clock using the Hardware Clock as reference...
INIT: Entering runlevel: 2
Configuring network interfaces: done.
Not recalculating module dependencies
Loading modules: apm Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-
pxa/h3600_hal.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/apm.o
h3600_ts Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h3600_ha
l.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/char/h3600_ts.o
sa1100-rtc Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/char/sa1100-rtc.
o
h3600-sleeve Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h360
0_hal.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h3600-sleeve.o
h3600_generic_sleeve Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-
pxa/h3600_hal.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h3600-sleeve.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/pcmcia/pcmcia_core.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/pcmcia/pxa/sa1100_h3600.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/pcmcia/h3600_generic_sleeve
.o
h3600-uda1341 sa1100_cs h3900-uda1380 Using
/lib/modules/2.4.19-rmk6-pxa1-hh6/kern
el/drivers/sound/pxa-audio.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/i2c/i2c-core.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/arch/arm/mach-pxa/h3600_hal.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/sound/soundcore.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/kernel/drivers/sound/h3900-uda1380.o

Generating RSA key, may take a while...
/usr/bin/ssh-keygen: error while loading shared libraries: libgcc_s.so.1:
cannot o
pen shared object file: Error 9
Generating DSA key, may take a while...
/usr/bin/ssh-keygen: error while loading shared libraries: libgcc_s.so.1:
cannot o
pen shared object file: Error 9
Starting OpenBSD Secure Shell server: sshd/usr/sbin/sshd: error while
loading shar
ed libraries: libgcc_s.so.1: cannot open shared object file: Error 9
.
Starting syslogd/klogd: done
Starting PCMCIA services: modulesUsing
/lib/modules/2.4.19-rmk6-pxa1-hh6/pcmcia/pc
mcia_core.o
insmod: A module named pcmcia_core already exists
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/pcmcia/pxa.o
insmod: unresolved symbol h3600_pcmcia_ops
insmod: unresolved symbol timing_increment_ns
Using /lib/modules/2.4.19-rmk6-pxa1-hh6/pcmcia/ds.o
ds: no socket drivers loaded!
insmod: init_module: ds: Operation not permitted
 cardmgr.
cardmgr[279]: no pcmcia driver in /proc/devices

familiar login:
Received on Mon Mar 17 2003 - 21:39:23 EST