The new version seems to work with my unit with the exception of the
touchscreen. I'm able to boot, but that's about it.
The first sign of problems is:
...
LINUX RC is executing
LINUX RC is executing
before mount
/linuxrc: 8: Syntax error: Bad substitution
...
Then there's
...
Fast boot, no file system check
Calculating module dependencies... depmod: Can't open
/lib/modules/2.4.0-test6-r
mk5-np2-64mb/modules.dep
done.
Loading modules: h3650_ts modprobe: Can't open dependencies file
/lib/modules/2.
4.0-test6-rmk5-np2-64mb/modules.dep (No such file or directory)
sa1100-uda1341 modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-r
mk5-np2-64mb/modules.dep (No such file or directory)
rm: cannot unlink `/fastboot': Read-only file system
Mounting local file systems...
...
Later on
...
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
/initrd/dev/ram1 on /initrd type ext2 (rw)
/initrd/dev/flash5 on /usr type cramfs (ro)
none on /initrd/dev/pts type devpts (rw,mode=0622EXT2-fs: unable to
read superbl
ock
)
mount: wrong fs type, bad option, bad superblock on /dev/flash6,
or too many mounted file systems
(aren't you trying to mount an extended partition,
instead of some logical partition inside?)
hostname: can't open `/etc/hostname'
...
Which seems to lead to the other failures.
...
Starting X demonstration
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-rmk5-n
p2-64mb/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-rmk5-n
p2-64mb/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-rmk5-n
p2-64mb/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-rmk5-n
p2-64mb/modules.dep (No such file or directory)
Touch screen not found.
: No such device
Error: Can't open display: unix:0
xcalibrate: calibrate.c:367: initX: Assertion `dpy' failed.
/etc/rc3.d/S40xdemo: line 47: 75 Aborted
./xcalibrate
./xsetroot: unable to open display 'unix:0'
./xrdb: Connection refused
./xrdb: Can't open display 'unix:0'
Error: Can't open display: unix:0
Starting PCMCIA services:./twm: unable to open display "unix:0"
module directory /lib/modules/2.4.0-test6-rmk5-np2-64mb/pcmcia not
found.
Error: Can't open display: unix:0
...
Any suggestions? Is there any other information that would be helpful?
Thanks,
Robert
---------------------- complete logs (from setting args on)
----------------
boot> set linuxargs "initrd root=/dev/flash4 ramdisk_size=8192
console=0"
setting param=linuxargs to value=initrd root=/dev/flash4
ramdisk_size=8192 con
sole=0
boot> set copy_ramdisk 0x01
setting param=copy_ramdisk to value=0x01
boot> params save
bootldr: set copy_ramdisk 0x00000001
bootldr: set linuxargs "initrd root=/dev/flash4 ramdisk_size=8192
console=0"
programming flash...erasing ...
Erasing sector 000C0000
len=00000075
writing flash..
addr: 000C0000 data: 746F6F62
verifying ... done.
boot> boot
booting flash...
boot_magic=5A5ABEEF
kernel_image_first_word=E1A00000
Linux ELF flash_imgstart=5004000C size=00077B80 dest=C0000000
offset=00008000
MMU Control=C19F4071
copying Linux kernel ... done
linuxEntryPoint: C0008000
kernel_image_dest: C0000000
kernel_image_offset: 00008000
C0008000: E1A00000
C0008004: E1A00000
C0008008: E1A00000
C000800C: E1A00000
C0008010: E1A00000
C0008014: E1A00000
C0008018: E1A00000
C000801C: E1A00000
C0008020: EA000001
C0008024: 016F2818
Copying compressed ramdisk from 00100004 to C11F0000...Done
root_filesystem_name=ramdisk
argc=00000002
args=initrd root=/dev/flash4 ramdisk_size=8192 console=0
setting boot parameters
first_word_of_ramdisk=0024BD00
Setting up Linux parameters at address=C0000100
using_ramdisk=00000001
initrd_start=C11F0000
dram_size=02000000
nr_pages=00002000
command line is: initrd root=/dev/flash4 ramdisk_size=8192 console=0
linuxEntryPoint=C0008000
Booting Linux image
Uncompressing Linux...................................... done, booting
the kern
el.
$PA16-Linux version 2.4.0-test6-rmk5-np2-64mb
(jamey@highwind.crl.dec.com) (gcc
version 2.95.2 19991024 (release)) #17 Thu Sep 7 14:41:31 EDT 2000
Processor: Intel StrongARM-1110 revision 6
machine_arch_type=22
Architecture: Compaq Bitsy
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: initrd root=/dev/flash4 ramdisk_size=8192 console=0
Console: colour dummy device 80x30
Calibrating delay loop... 180.22 BogoMIPS
Memory: 32MB = 32MB total
Memory: 28548KB available (945K code, 305K data, 60K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
Initializing RT netlink socket
Starting kswapd v1.7
Console: switching to colour frame buffer device 40x30
pty: 256 Unix98 ptys configured
rd_init
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Flash CFI Info: ****************************
manufacturer_code = 0x89 (0x89)
device_code = 0x17 (0x17)
cfi_ident = QRY
is_cfi_supported = 1
device_size = 0x17 (8388608 bytes, 8 MB, 64 Mb)
max_write_buffer_size = 5 (32 bytes)
num_erase_block_regions = 1
num_erase_blocks_r1 = 0x3f (63 blocks)
size_erase_blocks_r1 = 0x200 (131072 bytes)
FLASH Driver: using 28F640J3A devices
FLASH driver initialized
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 2351K
SA1100 serial driver version 1.3
ttyS0 on SA1100 UART3 (irq 17)
ttyS1 on SA1100 UART1 (irq 15)
ttyS2 on SA1100 UART2 (irq 16), using IRDA
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
VFS: Mounted root (ext2 filesystem).
LINUX RC is executing
LINUX RC is executing
before mount
/linuxrc: 8: Syntax error: Bad substitution
VFS: Mounted root (cramfs filesystem).
change_root: old root has d_count=4
Freeing init memory: 60K
INIT: version 2.76 booting
Fast boot, no file system check
Calculating module dependencies... depmod: Can't open
/lib/modules/2.4.0-test6-r
mk5-np2-64mb/modules.dep
done.
Loading modules: h3650_ts modprobe: Can't open dependencies file
/lib/modules/2.
4.0-test6-rmk5-np2-64mb/modules.dep (No such file or directory)
sa1100-uda1341 modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-r
mk5-np2-64mb/modules.dep (No such file or directory)
rm: cannot unlink `/fastboot': Read-only file system
Mounting local file systems...
mke2fs 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09
Linux ext2 filesystem format
Filesystem label=
2048 inodes, 8192 blocks
409 blocks (4.99%) reserved for the super user
First data block=1
Block size=1024 (log=0)
Fragment size=1024 (log=0)
1 block group
8192 blocks per group, 8192 fragments per group
2048 inodes per group
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
/initrd/dev/ram1 on /initrd type ext2 (rw)
/initrd/dev/flash5 on /usr type cramfs (ro)
none on /initrd/dev/pts type devpts (rw,mode=0622EXT2-fs: unable to read
superbl
ock
)
mount: wrong fs type, bad option, bad superblock on /dev/flash6,
or too many mounted file systems
(aren't you trying to mount an extended partition,
instead of some logical partition inside?)
hostname: can't open `/etc/hostname'
SKIFF: skipping hwclock adjustment
SKIFF: hwclock --adjust --utc
SKIFF: hwclock --hctosys --utc
Local time: Wed Dec 31 19:00:07 EST 1969
Cleaning: /tmp /var/lock /var/run.
Initializing random number generator... done.
Recovering nvi editor sessions... done.
INIT: Entering runlevel: 3
Starting inetd: inetd.
Starting portmap: portmap.
Starting X demonstration
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-rmk5-n
p2-64mb/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-rmk5-n
p2-64mb/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-rmk5-n
p2-64mb/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.0-test6-rmk5-n
p2-64mb/modules.dep (No such file or directory)
Touch screen not found.
: No such device
Error: Can't open display: unix:0
xcalibrate: calibrate.c:367: initX: Assertion `dpy' failed.
/etc/rc3.d/S40xdemo: line 47: 75 Aborted ./xcalibrate
./xsetroot: unable to open display 'unix:0'
./xrdb: Connection refused
./xrdb: Can't open display 'unix:0'
Error: Can't open display: unix:0
Starting PCMCIA services:./twm: unable to open display "unix:0"
module directory /lib/modules/2.4.0-test6-rmk5-np2-64mb/pcmcia not
found.
Error: Can't open display: unix:0
Handhelds Linux v0.11 (none) ttyS0
(none) login: root
Linux (none) 2.4.0-test6-rmk5-np2-64mb #17 Thu Sep 7 14:41:31 EDT 2000
armv4l un
known
Most of the programs included with the Handhelds GNU/Linux system are
freely redistributable; the exact distribution terms for each program
are described in the individual files in /usr/doc/*/copyright
Handhelds GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Edit IP address and network settings in /etc/init.d/netbase
Bitsy ramdisk-2-37 - X demo ramdisk - george 8/15/2000...
No mail.
login[89]: ROOT LOGIN on `ttyS0'
(none):/initrd/root#
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Received on Sat Sep 9 18:28:43 2000
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:43:41 EDT